#77371 - 12/05/02 03:42 AM
Print macro blank
|
Stealth Member
Registered: 03/11/04
Posts: 21
|
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Zandi Patrick S TSgt AFRL/IFOSS [mailto:Patrick.Zandi@RL.AF.MIL]
Sent: Wednesday, December 04, 2002 4:50 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Yep figured that one out.. However what about the Search button.
They want that.. = 8 - 0 (hair on fire, and jaw dropped)
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Zandi,
Hide the save button....
In each view's properties you can hide the "Details Pane Banner".
(However this will do nothing to stop some one from using the keyboard
shortcut. Ctrl+Enter)
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Zandi Patrick S
TSgt AFRL/IFOSS" To: ARSLIST@ARSLIST.ORG
.AF.MIL> Subject: No save button and
Refresh button ?
Sent by: "Action
Request System
discussion
list(ARSList)"
ORG>
12/04/2002 04:12
PM
Please respond to
arslist
Hello Folks,
I have one of those odd requests, and I thought I remembered someone
doing this.. I Am searching Arslist.. But so far I am not coming up with
this.
Remove the save button on right top of form, and replace it (Somewhere
else)
with a button
on the form instead..
(ahhh.. I know.. Don't ask !)
Also to have a refresh button on the form that does an F5 on the Form, and
the search window.
The requirements are from someone who uses Oracle regularly (web based) and
in this case is the CS Manager type For their section.
I would choose a Different way.. But who am I ! Thanks = 8-)
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
#77372 - 12/05/02 05:09 PM
Re: Print macro blank
[Re: paul_novotny]
|
Member
Registered: 06/12/01
Posts: 909
|
Karen,
Why does it have to be a macro?
Why not use the OLE/Send Keys to cause the "print command" (Ctrl+P) to be
pushed for the user?
You should be able to use OLE from the user tool, but it will not work on
the Mid-Tier. (Then again, a macro will not work on the Mid-Tier either.)
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Tavares Karen M Contr
375 MDG" To: ARSLIST@ARSLIST.ORG
OTT.AF.MIL> Subject: Print macro blank
Sent by: "Action Request
System discussion
list(ARSList)"
12/05/2002 09:42 AM
Please respond to
arslist
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is
in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
#77373 - 12/06/02 09:47 AM
Re: Print macro blank
[Re: paul_novotny]
|
Old Hand
Registered: 06/12/01
Posts: 2103
Loc: California
|
Matt,
Pat Zandi has modified Mike DeBord's original Send Keys application
and ADDED a Print (OLE) button, CLOSE USER TOOL and etc.
If you'd like to have additional keystroke combinations
then send a message to Pat and he will make it happen...we hope !!
Thanks to Pat for answering the call !!
You can find the file on our website:
http://www.buoyantsolutions.net/downloadole.htm
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Carey Matthew Black
Sent: Thursday, December 05, 2002 9:10 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Karen,
Why does it have to be a macro?
Why not use the OLE/Send Keys to cause the "print command" (Ctrl+P) to be
pushed for the user?
You should be able to use OLE from the user tool, but it will not work on
the Mid-Tier. (Then again, a macro will not work on the Mid-Tier either.)
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Tavares Karen M Contr
375 MDG" To:
ARSLIST@ARSLIST.ORG
OTT.AF.MIL> Subject: Print macro
blank
Sent by: "Action Request
System discussion
list(ARSList)"
12/05/2002 09:42 AM
Please respond to
arslist
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is
in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
#77374 - 12/06/02 11:12 AM
Re: Print macro blank
[Re: paul_novotny]
|
Pooh-Bah
Registered: 06/12/01
Posts: 1940
|
Sorry folks for the Misalignment..
I have add a total of 8 new buttons on Mike's
Save changes, Print, View History, Copy to New, Save and Next,
Up (searched), Dn (searched, Go Home.
I kept Mikes name on the Active links for Consistency ..
And Gidd will post later (Tonight?) OR (This weekend?)
He is a checking for consistency...
Have a Great Weekend ! = 8 - P
-----Original Message-----
From: Gidd Calden [mailto:gidd@BUOYANTSOLUTIONS.NET]
Sent: Friday, December 06, 2002 4:48 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Matt,
Pat Zandi has modified Mike DeBord's original Send Keys application and
ADDED a Print (OLE) button, CLOSE USER TOOL and etc. If you'd like to have
additional keystroke combinations then send a message to Pat and he will
make it happen...we hope !!
Thanks to Pat for answering the call !!
You can find the file on our website:
http://www.buoyantsolutions.net/downloadole.htm
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Carey Matthew Black
Sent: Thursday, December 05, 2002 9:10 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Karen,
Why does it have to be a macro?
Why not use the OLE/Send Keys to cause the "print command" (Ctrl+P) to be
pushed for the user? You should be able to use OLE from the user tool, but
it will not work on the Mid-Tier. (Then again, a macro will not work on the
Mid-Tier either.)
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Tavares Karen M Contr
375 MDG" To:
ARSLIST@ARSLIST.ORG
OTT.AF.MIL> Subject: Print macro
blank
Sent by: "Action Request
System discussion
list(ARSList)"
12/05/2002 09:42 AM
Please respond to
arslist
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
#77375 - 12/06/02 11:29 AM
Re: Print macro blank
[Re: paul_novotny]
|
Old Hand
Registered: 06/12/01
Posts: 2103
Loc: California
|
Pat,
As soon as I get my hands on the def file, test and verify then
I will post to the website for all to download !!
So, any chance you got SNOW in Northern NY ?? Take the
weekend off and go sledding with the kiddies !!
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Zandi Patrick S TSgt AFRL/IFOSS
Sent: Friday, December 06, 2002 3:12 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Importance: High
Sorry folks for the Misalignment..
I have add a total of 8 new buttons on Mike's
Save changes, Print, View History, Copy to New, Save and Next,
Up (searched), Dn (searched, Go Home.
I kept Mikes name on the Active links for Consistency ..
And Gidd will post later (Tonight?) OR (This weekend?)
He is a checking for consistency...
Have a Great Weekend ! = 8 - P
-----Original Message-----
From: Gidd Calden [mailto:gidd@BUOYANTSOLUTIONS.NET]
Sent: Friday, December 06, 2002 4:48 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Matt,
Pat Zandi has modified Mike DeBord's original Send Keys application and
ADDED a Print (OLE) button, CLOSE USER TOOL and etc. If you'd like to have
additional keystroke combinations then send a message to Pat and he will
make it happen...we hope !!
Thanks to Pat for answering the call !!
You can find the file on our website:
http://www.buoyantsolutions.net/downloadole.htm
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Carey Matthew Black
Sent: Thursday, December 05, 2002 9:10 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Karen,
Why does it have to be a macro?
Why not use the OLE/Send Keys to cause the "print command" (Ctrl+P) to be
pushed for the user? You should be able to use OLE from the user tool, but
it will not work on the Mid-Tier. (Then again, a macro will not work on the
Mid-Tier either.)
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Tavares Karen M Contr
375 MDG" To:
ARSLIST@ARSLIST.ORG
OTT.AF.MIL> Subject: Print macro
blank
Sent by: "Action Request
System discussion
list(ARSList)"
12/05/2002 09:42 AM
Please respond to
arslist
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
#77376 - 12/09/02 07:10 AM
Re: Print macro blank
[Re: paul_novotny]
|
Old Hand
Registered: 06/12/01
Posts: 2103
Loc: California
|
Pat (all),
Updated this file again, with the new functions you have
added (OLE). Thanks to you and Matt for working it out.
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Gidd Calden
Sent: Friday, December 06, 2002 1:48 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Matt,
Pat Zandi has modified Mike DeBord's original Send Keys application
and ADDED a Print (OLE) button, CLOSE USER TOOL and etc.
If you'd like to have additional keystroke combinations
then send a message to Pat and he will make it happen...we hope !!
Thanks to Pat for answering the call !!
You can find the file on our website:
http://www.buoyantsolutions.net/downloadole.htm
Regards...Gidd
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Carey Matthew Black
Sent: Thursday, December 05, 2002 9:10 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: Print macro blank
Karen,
Why does it have to be a macro?
Why not use the OLE/Send Keys to cause the "print command" (Ctrl+P) to be
pushed for the user?
You should be able to use OLE from the user tool, but it will not work on
the Mid-Tier. (Then again, a macro will not work on the Mid-Tier either.)
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
"Tavares Karen M Contr
375 MDG" To:
ARSLIST@ARSLIST.ORG
OTT.AF.MIL> Subject: Print macro
blank
Sent by: "Action Request
System discussion
list(ARSList)"
12/05/2002 09:42 AM
Please respond to
arslist
Does anyone else know the answer to Raphael Amiri's question, I am getting
the same thing. I am trying to create a macro to print a form. I start
recording, print my form, stop recording and when I try to run the macro
later I get an error that says it's blank.
Thanks
Karen Tavares
-----Original Message-----
From: Carey Matthew Black [mailto:matt.black@VERIZON.COM]
Sent: Wednesday, December 04, 2002 5:39 PM
To: ARSLIST@ARSLIST.ORG
Subject: Re: No save button and Refresh button ?
Press F5 from a button...
I think there is an OLE/SendKeys solution for that.. I'm sure it is
in
the archives somewhere..
Maybe on Gidd's web site... Yep .. there is something there...
http://www.buoyantsolutions.net/PUBLIC/DOWNLOAD/OLE/OLE%20SendKeys.ZIP
--
Carey Matthew Black
Remedy Skilled Professional (RSP)
ARS=Action Request System(Remedy)
Solution = People + Process + Tools
Fast, Accurate, Cheap.... Pick two.
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS
THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send
eMail to support@arslist.org
You may control your subscription options, including UNSUBSCRIBE,and ACCESS THE ARCHIVES at http://www.ARSLIST.org. For ARSList support, please send eMail to support@arslist.org
|
|
Top
|
|
|
|
|
|
|
Previous Topic
Index