**

I know this is my second request for help today.

We recently upgraded from 4.0.2 to 4.5.2 and we had a private server running
with RPC 390680 and TCP 50215. This config was necessary to allow NetCool
omnibus to connect through two firewalls.

I have been pulling my hair out all day because I can't see how to configure
this in 4.5.2

The previous lines I had were:

Private-RPC-Socket: 390680 Private-Specific-Port: 50215

I tried the same lines and it didn't seem to work.

Can anyone help, please?

Thanks
Karen

**

Its available in the MPSO option tab of the Admin tool from 4.5.2 onwards so
you can do this now directly from the GUI interface rather than medling with
the confg files...

Joe DeSouza,
CyberMAK Information Systems,
Kuwait.

----- Original Message -----
From: "Karen Thorn"
To:
Sent: Thursday, April 11, 2002 5:08 PM
Subject: Configuring private servers in 4.5.2


> **
>
> I know this is my second request for help today.
>
> We recently upgraded from 4.0.2 to 4.5.2 and we had a private server
running
> with RPC 390680 and TCP 50215. This config was necessary to allow NetCool
> omnibus to connect through two firewalls.
>
> I have been pulling my hair out all day because I can't see how to
configure
> this in 4.5.2
>
> The previous lines I had were:
>
> Private-RPC-Socket: 390680 Private-Specific-Port: 50215
>
> I tried the same lines and it didn't seem to work.
>
> Can anyone help, please?
>
> Thanks
> Karen
>
>


> To UNSUBSCRIBE, email the message "unsubscribe arslist" to:
listserv@listserv.vistait.com
> You may also control your subscription options, including UNSUBSCRIBE, at
www.ARSLIST.org

**

Karen:

You can configure your Private servers from the Admin tool. Select File -> Server Information -> Server Ports and Server Information to setup the Private Server.

I don't think that you can or should configure your Private Socket for a separate TCP/IP port. The new server paradigm uses multiple threads, rather than multiple processes. You can, however, set the entire server to a specific port.

James Mckenzie

Original Message:
-----------------
From: Karen Thorn karen.thorn@BT.COM
Date: Thu, 11 Apr 2002 15:08:37 +0100
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Configuring private servers in 4.5.2


**

I know this is my second request for help today.

We recently upgraded from 4.0.2 to 4.5.2 and we had a private server running
with RPC 390680 and TCP 50215. This config was necessary to allow NetCool
omnibus to connect through two firewalls.

I have been pulling my hair out all day because I can't see how to configure
this in 4.5.2

The previous lines I had were:

Private-RPC-Socket: 390680 Private-Specific-Port: 50215

I tried the same lines and it didn't seem to work.

Can anyone help, please?

Thanks
Karen





--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .

**

Thanks for the information.. I had set up the private server like that, but
I really need to be able to specify the TCP/IP port (apparently RPC is a bad
protocol and we can't use it, also, it makes it very difficult to configure
the firewalls) The main reason for the need of firewalls is that the
omnibus server is set of the customers LAN so we need to be protected from
them and they need to be protected from us.

There is a mention of the 'Private-Specific-Port in the documentation, but I
did try that and it didn't seem to work.

Thanks Again,
Karen


-----Original Message-----
From: jjmckenzie51@earthlink.net [mailto:jjmckenzie51@EARTHLINK.NET]
Sent: 11 April 2002 18:16
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Re: Configuring private servers in 4.5.2


**

Karen:

You can configure your Private servers from the Admin tool. Select File ->
Server Information -> Server Ports and Server Information to setup the
Private Server.

I don't think that you can or should configure your Private Socket for a
separate TCP/IP port. The new server paradigm uses multiple threads, rather
than multiple processes. You can, however, set the entire server to a
specific port.

James Mckenzie

Original Message:
-----------------
From: Karen Thorn karen.thorn@BT.COM
Date: Thu, 11 Apr 2002 15:08:37 +0100
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Configuring private servers in 4.5.2


**

I know this is my second request for help today.

We recently upgraded from 4.0.2 to 4.5.2 and we had a private server running
with RPC 390680 and TCP 50215. This config was necessary to allow NetCool
omnibus to connect through two firewalls.

I have been pulling my hair out all day because I can't see how to configure
this in 4.5.2

The previous lines I had were:

Private-RPC-Socket: 390680 Private-Specific-Port: 50215

I tried the same lines and it didn't seem to work.

Can anyone help, please?

Thanks
Karen



To UNSUBSCRIBE, email the message "unsubscribe arslist" to:
listserv@listserv.vistait.com You may also control your subscription
options, including UNSUBSCRIBE, at www.ARSLIST.org

--------------------------------------------------------------------
mail2web - Check your email from the web at http://mail2web.com/ .



To UNSUBSCRIBE, email the message "unsubscribe arslist" to:
listserv@listserv.vistait.com You may also control your subscription
options, including UNSUBSCRIBE, at www.ARSLIST.org