Hi, I have Group List, field 104 in a form, and a messagefield, I use push
field to a form and a filter send message to all users in that group. Works
fine.
But I would like to show users belonging to that group in a tablefield, but
I can not get the qual-syntax right. The tablefield shows no rows.
Yes, i know - I make something wrong...maybe something releated to groupid;
I know the name of the group as text is stored as 710; for example
Anyone ?

L Ars

_____________________________

Lars,
Look at the active link attached to the "SHOW MEMBERS" button on the
group form. It should give you a few good ideas.

--
Carey Matthew Black
Remedy Skilled Professional

-----Original Message-----
From: lars.j.pettersson@VATTENFALL.COM
[mailto:lars.j.pettersson@VATTENFALL.COM]
Sent: Wednesday, December 19, 2001 2:50 PM
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Qualification question

Hi, I have Group List, field 104 in a form, and a messagefield, I use push
field to a form and a filter send message to all users in that group. Works
fine. But I would like to show users belonging to that group in a
tablefield, but I can not get the qual-syntax right. The tablefield shows no
rows. Yes, i know - I make something wrong...maybe something releated to
groupid; I know the name of the group as text is stored as 710; for example
Anyone ?

L Ars

_____________________________

Hi,

What form are you using to generate the table from?
If User you may try 'Group List' LIKE "q0%"

HTH

Nicky Madjarov
President
Intellico Solutions, Inc.

6001Old Hickory Blvd. A-206
Hermitage, TN 37076

Voice/Fax: (801) 505 8672
Cell: (201) 747 8672
Pager: 2017478672@mobile.att.net
e-mail: nickym@intellicosolutions.net
http://www.intellicosolutions.net
----- Original Message -----
From:
To:
Sent: 12/19/2001 2:50 PM
Subject: Qualification question


> **
>
> Hi, I have Group List, field 104 in a form, and a messagefield, I use push
> field to a form and a filter send message to all users in that group.
Works
> fine.
> But I would like to show users belonging to that group in a tablefield,
but
> I can not get the qual-syntax right. The tablefield shows no rows.
> Yes, i know - I make something wrong...maybe something releated to
groupid;
> I know the name of the group as text is stored as 710; for example
> Anyone ?
>
> L Ars
>
>
________________
_____________
>

> You may also control your subscription options, including UNSUBSCRIBE, at
www.ARSLIST.org

_____________________________

Tried that, but that AL just runs a macro

-----Ursprungligt meddelande-----
Från: Black, Matt [mailto:matt.black@VERIZON.COM]
Skickat: den 19 december 2001 23:10
Till: ARSLIST@LISTSERV.VISTAIT.COM
Ämne: Re: Qualification question


**

Lars,
Look at the active link attached to the "SHOW MEMBERS" button on the
group form. It should give you a few good ideas.

--
Carey Matthew Black
Remedy Skilled Professional

-----Original Message-----
From: lars.j.pettersson@VATTENFALL.COM
[mailto:lars.j.pettersson@VATTENFALL.COM]
Sent: Wednesday, December 19, 2001 2:50 PM
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Qualification question

Hi, I have Group List, field 104 in a form, and a messagefield, I use push
field to a form and a filter send message to all users in that group. Works
fine. But I would like to show users belonging to that group in a
tablefield, but I can not get the qual-syntax right. The tablefield shows no
rows. Yes, i know - I make something wrong...maybe something releated to
groupid; I know the name of the group as text is stored as 710; for example
Anyone ?

L Ars

________________
_____________


You may also control your subscription options, including UNSUBSCRIBE, at
www.ARSLIST.org

_____________________________

This is the searchcriteria in the macro: '104' LIKE "$GID$;%" OR '104'
LIKE "%;$GID$;%" OR '104' LIKE "% $GID$;%"

Regards
Peter Forsberg
National Road Administration
Sweden
-----Ursprungligt meddelande-----
Från: lars.j.pettersson@VATTENFALL.COM
[mailto:lars.j.pettersson@VATTENFALL.COM]
Skickat: den 20 december 2001 08:07
Till: ARSLIST@LISTSERV.VISTAIT.COM
Ämne: SV: Qualification question


**

Tried that, but that AL just runs a macro

-----Ursprungligt meddelande-----
Från: Black, Matt [mailto:matt.black@VERIZON.COM]
Skickat: den 19 december 2001 23:10
Till: ARSLIST@LISTSERV.VISTAIT.COM
Ämne: Re: Qualification question


**

Lars,
Look at the active link attached to the "SHOW MEMBERS" button on the
group form. It should give you a few good ideas.

--
Carey Matthew Black
Remedy Skilled Professional

-----Original Message-----
From: lars.j.pettersson@VATTENFALL.COM
[mailto:lars.j.pettersson@VATTENFALL.COM]
Sent: Wednesday, December 19, 2001 2:50 PM
To: ARSLIST@LISTSERV.VISTAIT.COM
Subject: Qualification question

Hi, I have Group List, field 104 in a form, and a messagefield, I use push
field to a form and a filter send message to all users in that group. Works
fine. But I would like to show users belonging to that group in a
tablefield, but I can not get the qual-syntax right. The tablefield shows no
rows. Yes, i know - I make something wrong...maybe something releated to
groupid; I know the name of the group as text is stored as 710; for example
Anyone ?

L Ars

________________
_____________


You may also control your subscription options, including UNSUBSCRIBE, at
www.ARSLIST.org

________________
_____________


You may also control your subscription options, including UNSUBSCRIBE, at
www.ARSLIST.org

_____________________________