Table Drill-Down - MattReinfeldt.com - Remedy Discussion Site

You are not logged in. [Log In] MattReinfeldt.com » Forums » ARSList Archives » Archives - 2004 » Table Drill-Down

Topic Options

Rate This Topic

#101617 - 06/29/04 11:16 PM Table Drill-Down
stephen_earl885 Stealth Member Registered: 06/02/04 Posts: 18	Hi All, This is an odd one, or I could just be being a bit daft.... I have a table field on a form on which I have disabled the 'table drill down' option on the table. However if I dbl click an entry in the table it still allows me to drill down to the parent record, this is not what I want to happen. Currently the table allows the drill down, plus the AL I have fires also.. I don't understand why the table drill down is still operating... Does table drill down always work for an 'admin' user or should turning off the feature also disable it for all users... Thanx Stephen
Top

#101618 - 06/30/04 12:12 AM Re: Table Drill-Down [Re: edlazerson]
david_sanders addict Registered: 03/11/04 Posts: 404	Hi Stephen Make sure you have disabled the table drill-down in the correct view - this setting can vary from view to view. HTH David Sanders Remedy Consultant ============== tel +44 1494 468980 mobile +44 7710 377761 email david.sanders@westoverconsulting.co.uk web http://www.westoverconsulting.co.uk -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Stephen Earl Sent: 30 June 2004 10:17 To: ARSLIST@ARSLIST.ORG Subject: Table Drill-Down Hi All, This is an odd one, or I could just be being a bit daft.... I have a table field on a form on which I have disabled the 'table drill down' option on the table. However if I dbl click an entry in the table it still allows me to drill down to the parent record, this is not what I want to happen. Currently the table allows the drill down, plus the AL I have fires also.. I don't understand why the table drill down is still operating... Does table drill down always work for an 'admin' user or should turning off the feature also disable it for all users... Thanx Stephen UNSUBSCRIBE or access ARSList Archives at http://www.ARSLIST.org (Support: mailto:support@arslist.org ) ARSList is hosted by QMX SUPPORT SERVICES at www.QMXS.com
Top

#101619 - 06/30/04 12:21 AM SV: Table Drill-Down [Re: edlazerson]
lars pettersson Pooh-Bah Registered: 06/12/01 Posts: 1888	And reopen the form in UserTool so the change will take effect. -----Ursprungligt meddelande----- Fran: David Sanders [mailto:david.sanders@WESTOVERCONSULTING.CO.UK] Skickat: den 30 juni 2004 12:12 Till: ARSLIST@ARSLIST.ORG Amne: Re: Table Drill-Down Hi Stephen Make sure you have disabled the table drill-down in the correct view - this setting can vary from view to view. HTH David Sanders Remedy Consultant ============== tel +44 1494 468980 mobile +44 7710 377761 email david.sanders@westoverconsulting.co.uk web http://www.westoverconsulting.co.uk -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:ARSLIST@ARSLIST.ORG]On Behalf Of Stephen Earl Sent: 30 June 2004 10:17 To: ARSLIST@ARSLIST.ORG Subject: Table Drill-Down Hi All, This is an odd one, or I could just be being a bit daft.... I have a table field on a form on which I have disabled the 'table drill down' option on the table. However if I dbl click an entry in the table it still allows me to drill down to the parent record, this is not what I want to happen. Currently the table allows the drill down, plus the AL I have fires also.. I don't understand why the table drill down is still operating... Does table drill down always work for an 'admin' user or should turning off the feature also disable it for all users... Thanx Stephen UNSUBSCRIBE or access ARSList Archives at http://www.ARSLIST.org (Support: mailto:support@arslist.org ) ARSList is hosted by QMX SUPPORT SERVICES at www.QMXS.com
Top

View All Topics

Moderator: Matt Reinfeldt